View Z0103MA1AA2_35072.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(R)
Z01 Series
1A TRIACS
STANDARD
MAIN FEATURES:
Symbol IT(RMS) VDRM/VRRM IGT (Q1) Value 1 600 to 800 3 to 25 Unit A V mA
G
A2
A1
A2 A1
DESCRIPTION The Z01 series is suitable for general purpose AC switching applications. They can be found in applications such as home appliances (electrovalve, pump, door lock, small lamp control), fan speed controllers,... Different gate current sensitivities are available, allowing optimized performances when controlled directly from microcontrollers.
A2
A1 G A2
TO-92 (Z01xxA)
SOT-223 (Z01xxN)
ABSOLUTE MAXIMUM RATINGS
Symbol IT(RMS) Parameter RMS on-state current (full sine wave) SOT-223 TO-92 ITSM Non repetitive surge peak on-state current (full cycle, Tj initial = 25C) It Value for fusing Critical rate of rise of on-state current IG = 2 x IGT , tr 100 ns Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range F = 50 Hz F = 60 Hz Ttab = 90C 1 TI = 50C t = 20 ms t = 16.7 ms 8 8.5 0.35 Tj = 125C Tj = 125C Tj = 125C 20 1 0.1 - 40 to + 150 - 40 to + 125 A s A/s A W C A Value Unit A
I t dI/dt IGM PG(AV) Tstg Tj
tp = 10 ms F = 120 Hz tp = 20 s
July 2003 - Ed: 5
1/7
Z01 Series
ELECTRICAL CHARACTERISTICS (Tj = 25C, unless otherwise specified)
Symbol Test Conditions Quadrant 03 IGT (1) VD = 12 V VGT VGD IH (2) IL dV/dt (2) (dV/dt)c (2) VD = VDRM IT = 50 mA IG = 1.2 IGT I - III - IV II VD = 67 %VDRM gate open Tj = 110C (dI/dt)c = 0.44 A/ms Tj = 110C MIN. MIN. RL = 3.3 k Tj = 125C RL = 30 I - II - III IV ALL ALL MAX. MAX. MIN. MAX. MAX. 7 7 15 10 0.5 10 10 20 20 1 3 5 Z01xx 07 5 7 1.3 0.2 10 15 25 50 2 25 25 50 100 5 V/s V/s 09 10 10 10 25 25 mA V V mA mA Unit
STATIC CHARACTERISTICS
Symbol VTM (2) Vto (2) Rd (2) IDRM IRRM
Note 1: minimum IGT is guaranted at 5% of IGT max. Note 2: for both polarities of A2 referenced to A1
Test Conditions ITM = 1.4 A tp = 380 s Tj = 25C Tj = 125C Tj = 125C Tj = 25C Tj = 125C MAX. MAX. MAX. MAX.
Value 1.6 0.95 400 5 0.5
Unit V V m A mA
Threshold voltage Dynamic resistance VDRM = VRRM
THERMAL RESISTANCES
Symbol Rth(j-t) Rth(j-l) Rth(j-a) Junction to tab (AC) Junction to lead (AC) Junction to ambient S = 5 cm Parameter SOT-223 TO-92 SOT-223 TO-92
S = Copper surface under tab
Value 25 60 60 150
Unit C/W
C/W
2/7
Z01 Series
PRODUCT SELECTOR
Part Number 600 V Z0103MA Z0103MN Z0103SA Z0103SN Z0103NA Z0103NN Z0107MA Z0107MN Z0107SA Z0107SN Z0107NA Z0107NN Z0109MA Z0109MN Z0109SA Z0109SN Z0109NA Z0109NN Z0110MA Z0110MN Z0110SA Z0110SN Z0110NA Z0110NN X X X X X X X X X X X X X X X X X X X X X X X X Voltage 700 V 800 V 3 mA 3 mA 3 mA 3 mA 3 mA 3 mA 5 mA 5 mA 5 mA 5 mA 5 mA 5 mA 10 mA 10 mA 10 mA 10 mA 10 mA 10 mA 25 mA 25 mA 25 mA 25 mA 25 mA 25 mA Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 TO-92 SOT-223 Sensitivity Type Package
ORDERING INFORMATION
Z
TRIAC SERIES CURRENT: 1A
01 03
MA
VOLTAGE: M: 600V S: 700V N: 800V
Blank
1AA2
PACKING MODE: 1AA2: TO-92 bulk (preferred) 2AL2: TO-92 ammopack 5AA4: SOT-223 Tape & reel
PACKAGE: A: TO-92 N: SOT-223
SENSITIVITY: 03: 3mA 07: 5mA 09: 10mA 10: 25mA
3/7
Z01 Series
OTHER INFORMATION
Part Number Z01xxyA 1AA2 Z01xxyA 2AL2 Z0103yN 5AA4 Z0107yN 5AA4 Z0109yN 5AA4 Z0110yN 5AA4
Note: xx = sensitivity, y = voltage
Marking Z01xxyA Z01xxyA Z3y Z7y Z9y Z0y
Weight 0.2 g 0.2 g 0.12 g 0.12 g 0.12 g 0.12 g
Base quantity 2500 2000 1000 1000 1000 1000
Packing mode Bulk Ammopack Tape & reel Tape & reel Tape & reel Tape & reel
Fig. 1: Maximum power dissipation versus RMS on-state current (full cycle).
P(W) 1.50 1.25 1.00 0.75 0.50 0.25
Fig. 2-1: RMS on-state current versus ambient temperature (full cycle).
IT(RMS)(A) 1.2 1.0 0.8 0.6 0.4 0.2
TO-92 (Rth(j-a=Rth(j-l)) SOT-223 (Rth(j-a)=Rth(j-t))
IT(RMS)(A)
0.0 0 25
Tl or Ttab (C) 50 75 100 125
0.00 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Fig. 2-2: RMS on-state current versus ambient temperature (full cycle).
IT(RMS)(A) 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 25
TO-92 Rth(j-a)=150C/W SOT-223 (Rth(j-a)=60C/W)
Fig. 3: Relative variation of thermal impedance junction to ambient versus pulse duration.
K=[Zth(j-a)/Rth(j-a)] 1.00
Z01xxxA
0.10
Z01xxxN
Tamb(C) 50 75 100 125
0.01 1E-3 1E-2 1E-1
tp(s)
1E+0
1E+1
1E+2 5E+2
4/7
Z01 Series
Fig. 4: Relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values).
IGT,IH,IL [Tj] / IGT,IH,IL [Tj=25C] 2.5 2.0 1.5
IH & IL IGT
Fig. 5: Surge peak on-state current versus number of cycles.
ITSM(A) 9 8 7 6 5 4 3 2 1 0
t=20ms
Non repetitive Tj initial=25C
One cycle
1.0 0.5 Tj(C) 0.0 -40 -20 0 20 40 60 80 100 120 140
Repetitive Tamb=25C
Number of cycles
1
10
100
1000
Fig. 6: Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10ms, and corresponding value of It.
ITSM (A), It (As) 100.0
dI/dt limitation: 20A/s ITSM
Fig. 7: values).
On-state
characteristics
(maximum
ITM(A) 10.0
Tj initial=25C
10.0
Tj=Tj max.
1.0
1.0
It
Tj=25C
tp (ms) 0.1 0.01 0.10 1.00 10.00
VTM(V) 0.1 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Tj max. Vto= 0.95 V Rd= 420 m
Fig. 8: Relative variation of critical rate of decrease of main current versus (dV/dt)c (typical values).
(dI/dt)c [(dV/dt)c] / Specified (dI/dt)c 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 Z0109 Z0103 0.6 Z0107 0.4 Z0110 0.2 (dV/dt)c (V/s) 0.0 0.1 1.0 10.0
Fig. 9: Relative variation of critical rate of decrease of main current versus junction temperature.
(dI/dt)c [Tj] / (dI/dt)c [Tj specified] 6 5 4 3 2 1 Tj (C) 0 25 50 75 100 125
100.0
0
5/7
Z01 Series
Fig. 10: SOT-223 Thermal resistance junction to ambient versus copper surface under tab (printed circuit board FR4, copper thickness: 35m).
Rth(j-a) (C/W) 130 120 110 100 90 80 70 60 50 40 30 20 10 0 0.0
SOT-223
S(cm) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
PACKAGE MECHANICAL DATA SOT-223 (Plastic)
DIMENSIONS
A A1 B e1 D B1 V c
REF.
Millimeters Min. Typ. Max. Min.
Inches Typ. Max.
HE
e
A A1 B B1 c D e e1 E H V
0.02 0.60 2.90 0.24 6.30
3.30 6.70
0.70 3.00 0.26 6.50 2.3 4.6 3.50 7.00
1.80 0.071 0.1 0.0008 0.004 0.85 0.024 0.027 0.034 3.15 0.114 0.118 0.124 0.35 0.009 0.010 0.014 6.70 0.248 0.256 0.264 0.090 0.181 3.70 0.130 0.138 0.146 7.30 0.264 0.276 0.287 10 max
6/7
Z01 Series
FOOTPRINT DIMENSIONS (in millimeters) SOT-223 (Plastic)
PACKAGE MECHANICAL DATA TO-92 (Plastic)
DIMENSIONS
A a B C
REF.
Millimeters Min. Typ. 1.35 4.70 2.54 4.40 12.70 3.70 0.45 0.173 0.500 Max. Min.
Inches Typ. 0.053 0.185 0.100 Max.
F
D
E
A B C D E F a
0.146 0.017
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. (c) The ST logo is a registered trademark of STMicroelectronics (c) 2003 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A http://www.st.com
7/7

▲Up To Search▲

Price & Availability of Z0103MA1AA2

	To Download Z0103MA1AA2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .